INFORMATION

Updated:
BundleID:
OCTech.Mobile.Applications.OBDLink
Version:
5.37.1
Size:
42M
Category:
Communication
Required:
Android
Rating:
Publish:
2023-09-22
Price:
Free
Developer:

WHAT'S NEW

- Added support for FCA 2024 enhanced diagnostics.
- Added support for Ford 2023 enhanced diagnostics.
- Fixed a bug that could cause the Ford enhanced diagnostics network prompt to be displayed each time you connect.
- Minor bug fixes and improvements.

OBDLink App SCREENSHOT

【图】OBDLink (OBD car diagnostics)(截图1)【图】OBDLink (OBD car diagnostics)(截图2)【图】OBDLink (OBD car diagnostics)(截图3)

OBDLink App DESCRIPTION

***The OBDLink app exclusively works with these adapters***
OBDLink MX+
– OBDLink LX Bluetooth
– OBDLink MX Bluetooth
– OBDLink Bluetooth
– OBDLink MX Wi-Fi
– OBDLink WiFi
– OBDLink EX USB (with Android 3.1 or newer)
– OBDLink SX USB (with Android 3.1 or newer)
***The app will NOT work with any other brand of OBD adapter.***

Turn your phone or tablet into a full-fledged diagnostic scan tool: read diagnostic trouble codes, clear the “Check Engine” light, check emissions readiness, estimate fuel economy and much more!

Key features:

– Check and clear diagnostic trouble codes
– Read freeze frame data
– Display real-time data (over 90 parameters!)
– Customizable dashboards
– Emissions readiness for each US state
– Fuel economy MPG, l/100km or km/l calculation
– Multiple trip meters
– Log data to CSV format (compatible with Excel)
– Retrieve vehicle information including VIN number and calibration ID
– Oxygen Sensor Results (Mode $05)
– On-board Monitoring Tests (Mode $06)
– In-performance Tracking Counters (Mode $09)
– GPS tracking – plot vehicle parameters on a map in real-time
– Full diagnostic report that can be e-mailed
– English and Metric units
– Free unlimited updates
– Ad-free

SIMILAR to OBDLink App

Erase/Read fault memory for Volkswagen, Audi, Seat, Skoda using OBD ELM327.
This Software can erase/read Volkswagen, Audi, Seat, Skoda DTC Fault memory in all ECU`s at once by OBDII.Works with VAG cars start from year 2005 with CAN gateway.Any third party ELM327 Bluetooth OBD adapter can be used for this.except some models:i.e. Skoda Fabia, VW Polo, VW Lupo to year 2009 ELM327 compatible Bluetooth adapter must be used1. Plug ELM327 to car OBDII connector 2. Run software on your Smart phone Wait few seconds and all errors in all electronic systems will be erased.Some faults cannot be cleared (such as internal ECU faults) and the control module may explicitly refuse. Be aware, clearing fault Codes does not fix the problem that caused the fault!
Incode Outcode calculator for Ford/Mazda/Jaguar cars
Incode/outcode calculator is required for vehicle technicians to perform key learning, control unit replacement and other procedures. If wrong code received, please use middle section (6 characters) of code requested by car.For example- car gives the code: 0040 921D0E 000000Use921D0E to get correct answer.This app needs internet connection.The first code is free.It can calculate incode for various Ford, Mazda, Jaguar, Land Rover, Lincoln models.Diagnostic tools that may require this calculator: FordVCM II Rotunda, Ford vcm-obd, Ford mini-VCM, ForScan, Autocom, Forscan ELM327, FCOM, FoCOM, FVDI and others.
Trip computer+car diagnostic tool with widest variety of features and dashboard!
See what your car is doing in realtime, get OBD fault codes, car performance, sensor data and more!Car Scanner is a vehicle / car performance / trip computer / diagnostics tool and scanner that uses an OBD II Wi-Fi or Bluetooth adapter to connect to your OBD2 engine management / ECU.Car Scanner gives you a bunch of unique features:1) Layout your own dashboard with the gauges and charts you want! 2) Add custom (extended PIDs) and get information, that was hidden from you by car manufacturer!3) It can also show and reset a DTC fault code like a scantoolCar Scanner includes a huge database of DTC codes descriptions.4) Car Scanner allows you to read free-frames (sensors state when DTC is saved).5) Now with Mode 06you can get ECU self-monitoring test results. Helps you fix your car and helps keep repair costs down!6) Check if your car is ready for emission tests.7) Check all of the sensors at one screen8) Car Scanner works with any vehicle that uses the OBD 2 standard (most vehicles built after 2000, but can work for..
| 0vZ
A mechanic in your pocket. Diagnose a car is as simple as a child's play (OBD2)
Diagnose your car, find breakdowns and turn off the check engine light !Cardiag : Your Easy Car Diagnostic OBD2CarDiag is compatible with all Bluetooth OBD2 devicesThanks to its connected device and its free and intuitive mobile application, CarDiag allows motorists to diagnose their vehicle easily, independently and at a lower cost (breakdowns, wear of components, battery and pollution).The "CarDiag" application supports motorists from "A" to "Z" in the diagnostic, maintenance and repair of their vehicle independently and cheaply : since the doubt of a problem, the identification of the fault, a diagnostic in simple and easy-to-understand terms and a pollution score, Do-it-yourself auto repairs, tips to buy parts as well as a cost estimation at the nearest mechanic. It also provide a digital maintenance book.Features :- Automatic Diagnostic OBD2: Equipped with an OBD2 bluetooth device (easy to get and available for less than 10$), CarDiag provides a complete list of your car problems in simple and easy-to-understand terms.- Manual Diagnostic : Cardiag provides assistance for a direct diagnostic by the user (visual defects, noise, smells, etc.)- Reset the Check Engine..
OBDII Car Scanner and Car Diagnostic app
The Automend Pro OBD 2 app takes the guesswork out of car maintenance. By simply starting your car, Automend Pro can diagnose exactly what may be wrong with your car — instantly and clearly.A car scanner, car tracker, and advanced car diagnostic tool rolled into one, the Automend Pro OBD 2 provides reliably accurate information about your car’s health and which repairs are actually needed. It’s the onboard diagnostic tool you’ve been searching for.Car Diagnostics in a SnapPerfect for both car enthusiasts and those with less car experience, Automend Pro OBD2 concisely reveals the details of any type of car trouble through its OBD2 trouble codes. In clear language, the OBD2 reader what’s wrong — or not — with your car, SUV, truck, and more.In just seconds, the app works with the OBDii car diagnostic scanner to identify and explain a wide range of repairs and maintenance needs, saving you thousands that come with unnecessary repairs — or saving you a trip to the mechanic.The OBD2 app breaks down the severity of each issue, pinpointing the exact repairs needed, and..
Turn your phone or tablet into an advanced diagnostic scan tool with OBDLink!
The OBDLink app exclusively works with these adapters- OBDLink MX+- OBDLink LX Bluetooth- OBDLink MX Bluetooth- OBDLink Bluetooth- OBDLink MX Wi-Fi- OBDLink WiFi- OBDLink EX USB (with Android 3.1 or newer)- OBDLink SX USB (with Android 3.1 or newer)The app will NOT work with any other brand of OBD adapterTurn your phone or tablet into a full-fledged diagnostic scan tool: read diagnostic trouble codes, clear the "Check Engine" light, check emissions readiness, estimate fuel economy and much more! Key features:- Check and clear diagnostic trouble codes- Read freeze frame data- Display real-time data (over 90 parameters!)- Customizable dashboards- Emissions readiness for each US state- Fuel economy MPG, l/100km or km/l calculation- Multiple trip meters- Log data to CSV format (compatible with Excel)- Retrieve vehicle information including VIN number and calibration ID- Oxygen Sensor Results (Mode $05)- On-board Monitoring Tests (Mode $06)- In-performance Tracking Counters (Mode $09)- GPS trackingplot vehicle parameters on a map in real-time- Full diagnostic report that can be e-mailed- English and Metric units- Free unlimited updates- Ad-free

OBDLink App DOWNLOAD

Free DownloadGoogle PlayOfficial Website

App REVIEWS

Bryson

How are you going to support bank 1 LT and ST fuel trim and bank 1 sensor 1 and bank 2 sensor 2 voltage but not Bank 2 fuel trims and 02 sensor voltage for a V8 engine? Absolute waste of money. 2000 jeep grand cherokee 4.7 V8. Do not purchase this. Offers no support for any vehicle older than 2006. F this product.

GARY

New to this form of diagnosis, so far so good. No trouble codes.

Ben

Doesn't tell you much and is very confusing. I would spend a little extra just to get something that does a better job reading live data and can do vehicle test functions such as injector cutouts and etc

Darkside

Very handy device here. I use on Mopar mostly, but has helped many vehicles in the time I've had it.

Kelvin

Works as advertised. I have an OBD MX that I bought several years ago and I updated the software and it's working great. The only sensor I wish I could display data for is Oil Temp.

Tex

Cannot add a second vehicle nor find any instructions online about how to do this. It should be intuitive to the MX+ but apparently it is not. I didn't want to have to manually add a vehicle and the MX+ would not add a new vehicle when I followed the best instructions that I could find on the website.

Brettus

Device firmware update is broken on WiFi or Mobile Data. Won't read discrete PID's from two separate vehicles without adding the PID's from the most advanced one, (2019 Mazda CX-5 over a 2008 Ford Territory) both vehicles have Hi & Lo CAN...

Brenden

I love the app, and the OBD plug-ins, I used an LX model for years before finally getting the MX+, and I'm grateful I had, wish I would if so much sooner. I just wish it would include more brands/makes, most u.s. and Japanese based brands are listed, but everything European is left out for the enhanced OEM add-ons.

Cofields

Just wanted a reading. Have to put in toooo much personal information that has nothing to do with my car. Also my location. And then it only half works!

Frank

Unable to update firmware. Everything else works. Waiting on customer support.

Rudy

Had tire light on dash go on-off intermittently. Did not know what the problem was. Used the app to find out my left front tire TPM is faulty. Reads 0, then 20, then 35 psi randomly.

Frecil

A must have tool for all vehicle owners. Use with the OBDLink MX+ and the experience is amazing.

Guest

Tool has worked well enough for 5+ years. Intermittent connection issues here and there, learned a few things. Can't seem to use mobile data while connected to it... On any device. MX Wi-Fi Version I was hoping for firmware update, but it appears to be pretty much unsupported at this point. Still works with this app, I'm just factory resetting the device nearly everytime i need to connect to it. Still useful and well supported by the application. Best money I ever spent. Thanks for the product!

TV

Good for 2013 Tacoma Need to fix display in dashboard which shows current gear in the automatic transmission. Park, Reverse, Neutral are shown as numerical values. Other than that pretty happy. It would be nice to have the option to have the permission enabled to allow the app to Auto Startup when powering up my spare phone.

Frederic

A great app, but it has one annoying bug. Even when not running, it constantly tries to connect to the OBS2 dongle. Every time this happens, a message 'Loading vehicle data" appears on screen. I'd love it if the dev team would fix this. The app shouldn't be doing anything when I'm not using it.

Skyrunne

I finally got this app to work using my Ex device. It works well and I like that it can connect to the different networks in the vehicle (TPMS primarily). My one complaint is that it can not connect to all the networks at the same time. I think a compromise would be to auto connect to a particular network when on a certain dashboard. Other than this slight draw back it seems to be working well.

Damon

Short version, the app works but not so intuitive. I bought this with the MX+ adapter to log performance changes using a tuner in my Genesis. In the graph screen, I added speed, Mass Air Flow, and Boost psi which shows as I drive. However, the saved log file only has time, speed, and GPS coordinates. It wasn’t intuitive to go to the settings menu two screens away to configure the values you need logged. Also a bit clunky is on the graphs screen, the start/stop buttons are questionably working.

Steven

95% of the information that can be accessed and or tweaked (not recommended) is way above my pay grade but I didn't buy this for that and neither did everyone else I would assume. It's super easy connect, run a diagnostic, save or send the reports and then clear codes to turn the engine light off. Troubles codes are explained. You take that knowledge with you to the repair shop, see how honest your mechanic is and how much extra unneeded service&hrs of labor$$$ they add on. Dashboards=badass+HUD

Guest

Very versatile, can configure any parameter as a simple digital display or also with a dial which is often more useful. Even the free version has access to most basic parameters. A drawback is that it needs their proprietary OBD2 device for full access. My first one failed after a while. Customer service was excellent and they replaced it right away. No complaints there. Other than a bit pricey for full version, I give it two thumbs up, or four stars, lost one for cost.

Guest

This is the second device I have used. The first one was bricked after I followed the prompt to do a firmware update. The customer service was excellent, and they sent a replacement to me quickly, without requiring me to send the bad one back. It will occasionally lose pairing. When that happens it pairs again quickly. It won't pair with 4 digit Bluetooth code. Because of that, I have to use the app on my phone instead of my car stereo receiver that runs on Android OS.