INFORMATION

Updated:
BundleID:
com.fox3d.controller.pro
Version:
1.4.18
Category:
Tools
Required:
Android
Rating:
Publish:
2021-04-04
Price:
CNY24.1
Developer:

WHAT'S NEW

v 1.4.18
• USB communication: now working with SKR boards

v 1.4.16
• Improved support for Android 10

v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button

v 1.4.13
• Ability to prevent sleep mode
• Webserver: configurable refresh time

v 1.4.8
• Ability to change T, start/stop Fan and send Custom Commands during printing
• More Custom Commands
• 2 decimal digits for XYZ positions and moves (Pro)
• No file size limitation for Web interface upload (Pro)

3D Fox Pro, Printer Controller App SCREENSHOT

【图】3D Fox Pro, Printer Controller(截图1)【图】3D Fox Pro, Printer Controller(截图2)【图】3D Fox Pro, Printer Controller(截图3)

3D Fox Pro, Printer Controller App DESCRIPTION

Print G-code files directly from your Android device via Wifi, Bluetooth or USB OTG/Host port.

3D Fox is simple to use, has a clear and meaningful log screen and works great on small/inexpensive devices as well.

Developed with a Reprap Prusa i3 with Mega2560+Ramps+Marlin+Slic3r, Wifi module ESP8266 and BT module JY-MCU, it should work with many other HW/SW combinations.

IMPORTANT:
• Before buying this version please download the Free version and make sure your device and printer are supported, and that your are happy with the app.

SPECIAL FEATURES:
• Web interface to upload and print files from your PC/Tablet browser over the network.
• Take back control of SD card printing jobs after losing connection with the printer. You can use this feature to manager several printers with the same device: start a print job on printer A, then do something else on printer B, finally go back to printer A and take back control of the pending printing job.

NOTES:
• You must put your G-code files in \3DFox directory of your Andorid device. Use a file manager (we recommend ES File Explorer) to move files from their original location to \3DFox
• 3D Fox does not work with MakerBot or other printers using a proprietary communication protocol.

USB CONNECTION
• Android device must have a USB OTG/Host port: http://en.wikipedia.org/wiki/USB_On-The-Go
• Supported printer USB-to-serial chips:
– CDC ACM (eg Arduino Mega)
– FTDI (eg Melzi, Sanguinololu)
– CH34x
– CP210X, PL2303

WIFI MODULE ESP-01 (ESP8266 chip) succesfully tested:
• Firmware: transparent bridge \’esp-link\’ by JeeLabs: http://github.com/jeelabs/esp-link
• Baud rate: 250000.
• Upload speed: 1 MB transferred in 100 s (with Mega2560+Marlin), comparable to USB connection speed.
• Antenna: performances boosted with this improvement: http://www.thingiverse.com/thing:1665680

BLUETOOTH MODULE
• Bluetooth module JY-MCU connection and configuration: http://reprap.org/mediawiki/index.php?title=Jy-mcu#A_simple_way_to_change_BT_module_settings_-_apparently_using_ftdi_chip.2C_but_not_recommended

SUPPORT:
• For questions or bug reporting do not hesitate to write to Elisoft3D@gmail.com.
• For bug reporting please do not use Google Play Review comments as they do not allow an effective interaction with our development team.

SIMILAR to 3D Fox Pro, Printer Controller App

Android App for flash ESP8266 development board via USB OTG or WiFi (OTA).
https://www.instructables.com/id/Make-Blynk-Switch-IoT-4CH-Only-Use-Smartphone-ESP8/A tool runs on Android platform to create an IoT project easy. Makes it easy to upload binary file (result of compiled Arduino IDE) to any Expressif ESP8266 development board via USB OTG or WiFi (OTA).Features:★ Upload/Flash bianry file via USB OTG★ Upload/Flash bianry file via WiFi (OTA)★ Support any USB chip: CDC/ACM, FTDI, PL2303, CH34X and CP210X★ Serial Monitor for debuging★ Change the Blynk token, SSID & password automatically durring upload★ No Ads (Pro version)★ Access to Google Drive storage (Pro version)★ Multiple upload widgets button (Pro version)Note:- Your device must support USB Host OTG, otherwise the program will not work- Use good quality OTG adapter/cable, otherwise the uploading failure- If you get error: "Failed download. Check network connection." You can try to download the required file manually from this link: https://github.com/bluino/ESP8266Loader and https://github.com/bluino/ESP8266Loader_extrathen extract it to internal storage, so that you will have the /sdcard/ESP8266Loader folder.Warning: Try it on your own risk, it can damage your hardware (Android or ESP board) or lead to data loss (binary file or any Android data).
An App specially designed for RunCam 2, the lightest FPV HD Camera
RunCam App, for easy control of your RunCam high definition cameras.By connecting the camera via WiFi, you can:* Capture videos/photos with a variety of shooting modes.* Adjust the camera parameters and preview in real time.* Play/Download videos/photos.* Record in landscape and preview in full screen.* Update firmware through App.* Set all camera parameters.The main functions——Real-time parameters settings+ Full control of the camera: adjust the camera parameters, start/stop recording and switch mode.+ Customize white balance, exposure value, FOV, metering mode, image flip etc.+ Adjust the camera parameters and preview in real time according to the actual scene+ Loop recording, automatic recording, WDR and more parameters.Capture/Download+ User-friendly shooting interface, easy to operate.+ Linkage of the button: When the camera is connected to the App, you can also use the power button on the camera to start/stop shooting.+ View, play back the captured video/photos and download to the local album.+ Browse and delete files from your camera's memory cardUpdate your cameras+ Update your camera anytime, anywhere to experience the latest features and best performance--RunCam App applicable equipments -+ RunCam2+ RunCam3+RunCam Split--Instructions for use---Turn..
MQTT HMI platform - MQTT visual interface
Visual control and Monitor for MQTT brokers
This application allows you to view and record your smartport data in real time
This application allows you to view and record your smartport data in real time. Hardware is required to connect! You additionally need to connect signal inverter to taranis R9M smart port and then connect bluetooth module to it. Bluetooth module should be configured to work at 57600 baud rate.This application is open sourced. You can view source and report any issues at https://github.com/CrazyDude1994/android-taranis-smartport-telemetry
Control 3D printer from Smart Phone or Tablet, via Wifi, Bluetooth or USB.
Print G-code files directly from your Android device via Wifi, Bluetooth or USB OTG/Host port.3D Fox is simple to use, has a clear and meaningful log screen and works great on small/inexpensive devices as well.Developed with a Reprap Prusa i3 with Mega2560RampsMarlin/RepetierSlic3r, Wifi module ESP8266 and BT module JY-MCU, it should work with many other HW/SW combinations.SPECIAL FEATURES:• Web interface monitor printer and to upload/print files from your PC/Tablet browser over the network.• Video streaming of the device built-in webcam.• Take back control of SD card printing jobs after losing connection with the printer. You can use this feature to manager several printers with the same device: start a print job on printer A, then do something else on printer B, finally go back to printer A and take back control of the pending printing job.NOTES:• You must put your G-code files in \3DFox directory of your Andorid device. Use a file manager (we recommend ES File Explorer) to move files from their original location to \3DFox• 3D Fox does not work with MakerBot or other printers using a proprietary..
Control 3D printer from Smart Phone or Tablet, via Wifi, Bluetooth or USB.
Print G-code files directly from your Android device via Wifi, Bluetooth or USB OTG/Host port.3D Fox is simple to use, has a clear and meaningful log screen and works great on small/inexpensive devices as well.Developed with a Reprap Prusa i3 with Mega2560+Ramps+Marlin+Slic3r, Wifi module ESP8266 and BT module JY-MCU, it should work with many other HW/SW combinations.IMPORTANT: • Before buying this version please download the Free version and make sure your device and printer are supported, and that your are happy with the app.SPECIAL FEATURES:• Web interface to upload and print files from your PC/Tablet browser over the network.• Take back control of SD card printing jobs after losing connection with the printer. You can use this feature to manager several printers with the same device: start a print job on printer A, then do something else on printer B, finally go back to printer A and take back control of the pending printing job.NOTES:• You must put your G-code files in \3DFox directory of your Andorid device. Use a file manager (we recommend ES File Explorer) to move files..

3D Fox Pro, Printer Controller App DOWNLOAD

Google Play

App REVIEWS

Cut

This app is awesome gets rid of having to buy a raspberry pi, let's me 3d print from my ender 3 pro wirelessly, view my print from my camera, and all from an old phone that is finally repurposed.💯🔥🔥

PowerMec..

This app helped to change my perspective of what android is capable of. By using this app, I am able to stream a gcodes directly to my Tronxy. This allows me to send my files to the tablet instead of having to place them on an sd card. Not only does this app speed up my workflow, it allows me to control things like temperature and bed postioning. This app is simple and straightforward, yet powerful and reliable. I HIGHLY recommend.

Lon

Not impressed. OctoPrint (a free program) is a profoundly better option.
----------
Hi Lon, sorry to hear you are disappointed. Please note that OctoPrint is a program that runs on a different hardware (Raspberry Pi) and different OS (Raspbian), with all kind of pros and cons. Besides, there is also a Free version of 3D Fox that you can use and test before buying the Pro version.

Guest

Powerful app succeeds where other apps failed.

Guest

For couple of weeks I did nothing.until now.and always notified that need to restart the application and the baudrate 250000 from firmware and 250000 to application is not same,₩+#!!!
----------
Hi Ronald, could you please be more specific? We do not fully understand what your problem is. Thanks

Guest

Gostei do app ,Comprei a versão PRO mas o app sempre me diz que a pasta de arquivos G code está vazia sendo que coloquei vários arquivos dentro dela,darei 5 estrelas quando me ajudarem com isso,mas o restatnte do app em si está a funcionar.
----------
Hi, did you try to give Storage permission to the app?

Guest

This app has been very helpful in testing and calibration of my printer. I haven't used it for printing and advanced functions but connectivity to my Printrbot from my Galaxy S8 using a usb c otg cable has been consistent. This gives me access to moveme t, fan, extruder, and M code console without a PC. I've repaired 2 printers with the help of this app thanks!!

Guest

One of the best useful practical apps, now it's time for it to use an internet service to control a 3D printer over a distance Like esp32 connected to it like blynk or esp link etc..

Guest

Excellent for adjusting my 3D printer amongst other useful things on my Marlin powered Anet A8. The app is in need of a facelift though. UI feels aged on my S8 Plus. But well worth buying the pro version

Guest

Great app, very useful for sending G-code to printers with my tablet. Very responsive developer. I fully recommend this app.

Guest

Simple connection to board via USB, programmable buttons and responsive developer - lots to like.

Guest

Nice app, easy to use, with everything I need to run my printer. The macros are really useful. The app is very responsive, the connection to the printer seems to be really solid. The developer is also very responsive. Highly recommend this app.