INFORMATION

Updated:
BundleID:
com.peterhohsy.nmeapaserpro
Version:
2.7.35
Category:
Tools
Required:
Android
Rating:
Publish:
2021-10-26
Price:
HKD15
Developer:

WHAT'S NEW

2.7.35
- Fix minor bugs

2.7.20
- Fix background logging bug in Android 11

2.5.0
- Remove storage permission

1.8.0
- Fix background logging bug in Android 8.0

NMEA Tools Pro App SCREENSHOT

【图】NMEA Tools Pro(截图1)【图】NMEA Tools Pro(截图2)【图】NMEA Tools Pro(截图3)

NMEA Tools Pro App DESCRIPTION

The purpose NMEA Tools is to log your RAW GPS information (NMEA sentences) to a file on your SD card. Also, it can parse a NMEA file.

Features:
1. Log RAW NMEA sentences
2. Display the route in Google Map
3. Support background logging
4. Show latitude, longitude, altitude, speed, PDOP and HDOP
5. Parse a NMEA file
6. Support GPS , GLONASS and BeiDou systems

Features in PRO version :
1. No limitation of capturing NMEA sentences
2. NMEA sentence filter
3. No advertisement
4. Support Dropbox file uploading using built-in Dropbox engine

*** The NMEA logging function does not work on some phones. Please test your phone with the NMEA tools before you buy the PRO version

Permission
* Modify/delete SD card contents is used to write NMEA file to SD card
* Internet access is used for ad and Google Map
* Prevent phone from sleeping is used to keep the screen on for user taking lap

How to use the app ?
Press top left “GPS” icon to enable GPS.
Press “Log” button to start logging NMEA data. To stop logging, press the “Log” button again
Press “Save” icon to save the logging data to NMEA file

Note :
1. For those who need support please email to the designated email.
Do NOT use either the feedback area to write questions, it is not appropriate and that is not guaranteed that can read them.
2. If you like this app, please purchase the PRO version.
https://play.google.com/store/apps/details?id=com.peterhohsy.nmeatoolspro

All other trade names mentioned in this app or the other documentation provided by this app are trademarks or registered trademarks of their respective holder. This app is not related or affiliated in any way these companies.

SIMILAR to NMEA Tools Pro App

FireMapper is an application for firefighters to generate bushfire maps
This application is designed for quickly generating bushfire maps. It is based on the popular iOS version of FireMapper.BUSHFIRE SYMBOLSThis version contains bush firefighting symbols that are commonly used in Australia, USA & Canada with support for:* National All Hazards Symbology Set* USA Interagency Wildfire Point Symbols* NZIC SymbolsGPS RECORDINGYou can record lines using the internal GPS. A warning is displayed if the device is using a network derived location. FireMapper will only use the GPS in the background if you have a recording in progress.DRAW LINESQuickly draw lines on the map using your finger. Line types include:- active/inactive fire- proposed/completed control lines- proposed/completed backburnsand moreLOCATION FORMATS:-Latitude/Longitude (Decimal Degrees and Degree Minutes/Aviation)- UTM Coordinates- 1:25 000, 1:50 000 & 1:100 000 map sheet references- UBD Map References (Sydney, Canberra, Adelaide, Perth)FIND LOCATION- search for locations using different coordinate formats (4 figure, 6 figure, 14 figure, lat/lng, utm and more)OFFLINE SUPPORTMaps can be created offline without an internet connection. Map layers are cached for offline supportMULTIPLE MAP LAYERS:- Standard- Satellite/Hybrid- Terrain/Topographic- Australian Topographic- New Zealand Topographic- United States TopographicMAP EXPORT FORMATSMultiple..
A tutorial of Raspberry Pi Pico development board
This app is based on Raspberry Pi Pico development board. All the codes provided are written in micropythonIt is suitable for hobbyist or students.Features 1Display projects• I2C Character LCM 16x2, 20x4• I2C OLED 96x64, SPI OLED 96x642Sensors Projects• 18B20 (1-wire temperature sensor)• BMP180 (pressure)• MPU6050 (acceleratorgyroscope)• Pulse sensor (Measure heart rate) 3Automation projects • Home automation using Wifi • Home automation using bluetooth• Home automation using bluetooth LE4Internet-of-Things Projects• Post sensor data to Iot Thingspeak website• Post sensor data via SMS More projects will be added soon !Raspberry Pi is a trademark of Raspberry Pi foundation"Python" and the Python logos are trademarks or registered trademarks of the Python Software Foundation. All other trade names mentioned in this app or the other documentation provided by this app are trademarks or registered trademarks of their respective holder. This app is not related or affiliated in any way these companies.
Flight Computer for Paramotor, Paraglider, Glider and Ultra Light plane Pilots
Welcome to PPGpS, a Flight Computer for Paramotor, Paraglider, Glider and Ultra Light plane Pilots.-Airspaces display-PPGpS can now display an Airspace overlay on the map. It is using OpenAir files that can be downloaded from the net and copied in the \PPGpS\airspaces folder.You may also use the AirspaceMap app to help you download some OpenAir files from various sources easily, and customize these large airspace maps to fit your needs, and then export them to the PPGpS airspace folder.*FEATURES OVERVIEW:-Real time flight information -Wind direction and speed estimation-Takeoff and Landing phases auto-detection-Return home information (display estimated travel time and bearing)-Fuel calculation and warning-Airspace display (OpenAir files)-Emergency geo-localized SMS-Barometric sensor support to improve altitude accuracy-QHN, QFE Altimeter setting-Online and offline maps-Offline maps creator-Google Maps and OpenStreetMap map providers-Rotating Map-Log flights in KML (for Google Earth), IGC (Leonardo servers) and GPX files-Replay recorded flights-Waypoint management -Especially developed for Paramotor-Embedded User Manual and Tip of the day feature.-Real time flight tracking on www.ppgps.info-Variometer-Sunset time-FlyNet2, Flight Bandit, BlueFlyVario and LK8Ex1 variometer support-Android Wear SmartWatch support with PPGpS Wear*MAPS:Online:PPGpS can display Google or OpenStreetMap maps..
- Added support for the new SKF TKSA 71 hardware.
The Horizontal shaft alignment app is designed to be used with the SKF Shaft Alignment Tool TKSA 51 or TKSA 71. Together, the hardware and the app form an alignment system that allows shaft alignments of many rotating machines to be made in an intuitive and easy way. The system uses line laser to PSD technology that enables highly accurate and reliable shaft alignments. The hardware and its app communicate wirelessly via Bluetooth®. Without the hardware the app can nonetheless be used, as it features a fully functional demonstration mode allowing the complete alignment process to be experienced before purchasing the TKSA 51 or TKSA 71 instrument.

KEY FEATURES:
• Very easy-to-use – The Horizontal shaft alignment app focuses on making the main alignment tasks as easy as possible and enabling accurate shaft alignments. 

• Full measurement flexibility – The Horizontal shaft alignment app uses a flexible three position measurement method that allows measurements to start at any angle and if the space is limited alignments can be performed with a total of 40° rotation only.

• Demonstration mode – The Horizontal shaft..
| SKF
Testing version of LK8000
This is the beta testing version of LK8000.LK8000 is a Tactical Flight Navigator for gliders, paragliders, hang-gliders and general aviation. It is a consolidated open-source project born in 2010, available on most platforms: PC, PNA, KOBO, LINUX, IOS (under development), RASPBERRY and ANDROIDLK is translated into 17 languages and used in over 67 countries by many thousands pilots every day.LK can be configured to act as a navigator for free flight (gliding, paragliding, hang-gliding), for light aircraft (general aviation), and also for trekking and offroad! On our website you can download the necessary maps for your country, together with documentation, hints, tutorials and news. We also offer free support to all users on our international support forum (upon free subscription). Maps can also be downloaded from LK configuration using LKMAPS app.In addition to classic flight navigation functions, LK has many advanced features:- Detection of start of free flight (both towing and winching)- Accurate calculations of scoring, due to the above feature- Forecasting for completion of FAI triangles, with virtual waypoint created dinamically and available for a "go-to"- The Oracle, a..
8051 tutorial with C code wizard
This app is a 8051 tutorial. It is suitable for hobbyist or engineering students.Have you forgotten how to set up the TCON, TMOD, SCON, IE register etc.? 8051 Studio has a rapid 8051 C source code generator. Just pick up pre-defined devices and press "generation" button. All the C 8051 source code files will be generated. It works like a charm. You do not care about the signal sequence. Just call a function ShowString( ) allow you to write a string to a character LCD. 8051 C programming is so easy after you have used the app.Features• Modular design and easy to use • Lots of electronic devices including led, buzzer, relay, key switch, keypad, human sensor, 7-segment, LCM 8-bit etc• Fast timer 0,1 setting• Pin conflict detection • Auto/manual pin assignment • One-click generation C 8051 source codeFeatures in Pro• Support 93C46 eeprom• Support I2C eeprom 24C01 (128B)24C512 (64kB)• Support SPI eeprom 25010 (128B)25M02 (256kB)• Fast baud setup and auto generate UART interrupt routine• Fast timer 2 (8052 only) setup and auto generate timer interrupt routine• Extra devices :..
Analog and digital circuit calculator
This app is a collection of basic electronic calculators. It is suitable for hobbyist, electronic engineers or professionals.Basic tools• Resistor color code• Inductor color code• Resistor SMD marking & EIA-96• dBm, dbW, dBuV converter• Resistors in series• Resistors in parallel• Two resistors in ratio• Voltage divider• Ohm's law• Y-Δ converter• L, C reactance• Complex number operation• RC charging time constant• RC filter• RL filter• LC circuit• 555 monostable• 555 astable• Wheatstone bridge• Trace width calculator• Battery capacity• Operational amplifier• LED calculator• RMS calculator• Range calculator• Temperature conversion• BJT bias voltage• Voltage regulator• Shunt regulator• Length converter• Limit 10 combinations of component valuesDigital Tools• Number converter• Logic gates• DAC R-2R• Analog-to-digital• 7-segment display• Minimization of boolean function• Half adder & full adder• Synchronous counter up to 6 states• Cyclic redundancy check CRC-8, CRC-16, CRC-32• Hamming codeElectronics resources• SI unit prefix• Physical quantities• Circuit symbol• ASCII table• 74xx series• CMOS 40xx series• Pinouts• C programming language• Python language• Common linux command for Raspberry Pi• Resistivity table• Permeability table• Permittivity table• Ampacity table• AWG table• Standard wire guage (SWG) table• World plug• EDA..
Record solve time. Best time and average time are shown
The application records the time for completion of magic cubes 2x2x2 ,3x3x3 and other magic cubes etc.Features1. Scramble Generator for magic cubes 2x2x2 ,3x3x3 2. Self-defined scrambler of your favorite cubes3. Chart4. The best time and average time are calculated.5. Support English, German, French, Italian, Spanish, Trad. Chinese, Simplified Chinese and JapaneseFeatures in PRO1. Inspection timer2. The time records can be exported in comma-separated values (CSV) file. 3. No limitation4. No adPermission * Internet access is used for ad and Dropbox access* Prevent phone from sleeping is used to keep the screen on for user taking lapHow to use the app ?Tap the hand icon to reset the timer. The timer will start when you hand leave the icon. Tap the hand icon again to stop the timer.Press the top left "Records" icon, you can see all your records. Long press a record to delete it. Note :For those who need support please email to the designated email.Do NOT use either the feedback area to write questions, it is not appropriate and that is not guaranteed that can read them.
Game for adding numbers
16384 is a game of adding numbersHow to play❇ Swipe to move all tiles to merge them together.❇ Your score will increase as fast as more cell you will combine.❇ When you reach the target within time/steps, special tools will be provided❇ Use bomb or interchange tools to help you to reach the target❇ Try to get to the 16384 tile!
Find out combinations of L and C making a desired resonant frequency
This app is used to calculate LC resonant circuit. It is suitable for hobbyist or electronic engineers. Features:1. Calculate resonant frequency by capacitor and inductor values2. To find out combinations of capacitance and inductance making a desired resonant frequency3. Save all combinations in a CSV (Excel) file 4. Use preferred values of capacitors and inductorsFeatures in PRO version only:1. Can use preferred value 5% for capacitor and 5% for inductor2. No Ads3. No limitationNote :1. For those who need support please email to the designated email.Do NOT use either the feedback area to write questions, it is not appropriate and that is not guaranteed that can read them.
A tutorial of Raspberry Pi for hobbyist or students
Features 1Display projects• Character LCM 16x2• I2C OLED 96x64, SPI OLED 96x64• TFT 176x2202Sensors Projects• DHT11 (temperature and humidity)• BMP280 (pressure)• 18B20 (1-wire temperature sensor)• MPU6050 (acceleratorgyroscope)3Automation projects• Home automation using browser • Home automation using bluetooth • Home automation using bluetooth LE • Home automation using LoRa 4Internet-of-Things Projects• Post sensor data to Iot Thingspeak websiteMore projects will be added soon !Raspberry Pi is a trademark of Raspberry Pi foundation"Python" and the Python logos are trademarks or registered trademarks of the Python Software Foundation. All other trade names mentioned in this app or the other documentation provided by this app are trademarks or registered trademarks of their respective holder. This app is not related or affiliated in any way these companies.
Permanently delete photos and prevent file recovery
The application is to delete private files forever. It is suitable for users who are going to sell their Android phones.Feature1. Select photos in any folder2. Secure delete private photos. 3. Support English, German, Spanish, French, Italian, Portuguese, Japanese, Trad. Chinese,simplified Chinese and RussianFeature in PRO version1. Secure delete any file type2. Support folder deletion3. Select all files in a folderDeleted files CANNOT be recoveredNote :1. For those who need support please email to meDo NOT use either the feedback area to write questions, it is not appropriate and that is not guaranteed that can read them.
Find roots, maximum or minimum of quadratic equation
This app is to calculate quadratic equations.Features• Solve quadratic equation• Show real roots and complex roots• Calculate maximum or minimum point• Save result in text file• Support English, German, French, Italian, Spanish, Portuguese, Japanese, Traditional Chinese and Simplified ChineseFeatures in PRO version only:• No Ads• Show equation in graphNote :1. For those who need support please email to meDo NOT use either the feedback area to write questions, it is not appropriate and that is not guaranteed that can read them.
Calculation of astable and monostable circuit
IC 555 is a basic timer IC for hobbyist or electronic engineers. This app is used to calculate monostable and astable circuit Features:1. Calculate monostable circuit2. Calculate frequency of astable circuit 3. Calculate component values of monostable and astable circuit. Save component values in CSV file (Excel file) Features in PRO version only:1. Selectable preferred value of resistors and capacitors2. Share CSV file to other apps3. No limitation4. No AdNote :For those who need support please email to the designated email.Do NOT use either the feedback area to write questions, it is not appropriate and that is not guaranteed that can read them.
Code wizard generating C code and 26 demo projects
This app is a AVR tutorial based on ATMEGA16 C language. It is suitable for hobbyist or engineering students.Learning AVR mcu is difficult. The learning curve is steep. The process including reading datasheet, writing code, building prototypes and troubleshooting. The most possible errors are the setting wrong value of registers.Now, AVR tutorial Pro is the solution. The code wizard allow you to set the timer, UART, ADC, interrupt and peripherals by just a few clicks in setting. The proven C source code is generated automatically. Though the code wizard is based on ATMEGA16 mcu, it is easy to port to other ATMEGA mcu since the source code generated is highly structuredFeatures• AVR architecture review• AVR asm mnemonics & C lanugage• 26 demo projects including 16x2 LCM, i2c eeprom, spi eeprom, ADC, ultrasonic etc• Code wizard for UART, timer, interrupt, ADC and external peripherals including LED, buzzer, key switch, external interrupt, 7-segment display, 8x8 led matrix, 4x4 keypad, segment lcd, 16x2 LCM, i2c eeprom, spi eeprom, RTC etc• Optional projects : OLED, TFT 220x176, MPU6050, 18B20, DHT11, BMP180, DFPlayer mp3 module,..

NMEA Tools Pro App DOWNLOAD

Google Play

App REVIEWS

Brendan

App works well, I like how I can change what metrics to display. My only gripe is that I wish it would save my preferences between uses.

Elias

just upgraded to pro version, I like it

mini

Not saving continuous data

Andrew

It works. But I expected timestamps at the beginning of each line. This information is available, according to documentation to OnNmeaListener interface and such feature will significantly simplify post-prpcessing.
----------
We know the timestamp is provided by the OnNmeaListener interface. But most PC nmea tools only accept plain nmea sentences text file (no timestamp). It will get trouble when we add the timestamp in the nmea file. If you still have problems in using the app, please contact us (peterhohsy@gmail.com)

Tanya

Does exactly what I need!