INFORMATION

Updated:
BundleID:
reader.meter.energy.gmail.com.energymeterreader
Version:
2.1.1
Category:
Tools
Required:
Android
Rating:
Publish:
2023-08-27
Price:
Free
Developer:

WHAT'S NEW

New:
- possibility to add a note about scanning, like "All lights on". Note is shown on history view.
- scanning can be done now in other orientations than just upright.

Energy Meter Reader App SCREENSHOT

【图】Energy Meter Reader(截图1)【图】Energy Meter Reader(截图2)【图】Energy Meter Reader(截图3)

Energy Meter Reader App DESCRIPTION

Want to know what is your household’s electricity consumption at the moment? Energy Meter Reader application tells it. Electricity consumption is calculated from energy meter’s blinking LED light, using your phone’s camera. If you have set energy cost per kWh to settings, you also get daily cost of your household’s electricity consumption. With Energy Meter Reader application you are able to compare how much electricity consumption changes when different electrical equipment / household lighting are on or off.

Default value for imp /kWh is 1000, currency is Euro and energy cost 5 cents / kWh.
Supported languages: ENG, FIN.
Supported currencies: EUR, GBP, RON, USD, CZK, SEK.

Instructions:
– set your imp/kWh value and energy price under settings (you can leave price setting empty).
– navigate back to scan view and point the camera to the blinking light in front of the energy meter.
– hold the phone in upright position.
– move close enough and the measurement starts automatically.
– hold the phone still and wait for two blinks to register.
– view previously saved results from the History view. You can delete old measurements by long clicking item in history list.

You can also use continuous measurement mode by enabling it from settings.

Credits:
Mika Honkonen
Tero Toivonen
Markku Leinonen

SIMILAR to Energy Meter Reader App

A Relational Database for Sailforms
Relational Application BuilderSailformsPro is a powerful, but easy to use Forms Application builder.SailformsPro comes preload with forms and applications you can use and modify.You can take Sailforms Forms you have built and hook them together in an Application System.You can connect Forms, look up values, get and put values between forms.You can setup transactions to Add and Subtract values to remote forms, these transactions automatically adjust when values are changed and deleted.Pivot Tables let you embed remote form entries in a form to list and select common related values.Define buttons and menus to control the work flow.Look at the application samples to see what can be done with SailformsPro.
Want to know what is your household's electricity consumption at the moment?
Want to know what is your household's electricity consumption at the moment? Energy Meter Reader application tells it. Electricity consumption is calculated from energy meter's blinking LED light, using your phone's camera. If you have set energy cost per kWh to settings, you also get daily cost of your household's electricity consumption. With Energy Meter Reader application you are able to compare how much electricity consumption changes when different electrical equipment / household lighting are on or off.Default value for imp /kWh is 1000, currency is Euro and energy cost 5 cents / kWh.Supported languages: ENG, FIN.Supported currencies: EUR, GBP, RON, USD, CZK, SEK.Instructions:- set your imp/kWh value and energy price under settings (you can leave price setting empty).- navigate back to scan view and point the camera to the blinking light in front of the energy meter.- hold the phone in upright position.- move close enough and the measurement starts automatically. - hold the phone still and wait for two blinks to register.- view previously saved results from the History view. You can delete old measurements by long clicking..

Energy Meter Reader App DOWNLOAD

Free DownloadGoogle Play

App REVIEWS

Chris

I can see the led flashing on the camera screen, but it's not registering :-(

Jan

Harmillisen huonosti tunnistaa Ledin välähdyksiä. Tässä taloudessa ei ole kuin yksi laite joka sen tekee ja se on Samsung Tabi, n 5v vanha. Yksikön Motorola tai Nokia ei tunnista. Kun skannauksen aloittaa, tulee 1/2 havaittu. Yhdessä Nokiassa tunnistaa, mutta skannauksella sai tuloksen jatkuva mittaus 55kwh vaikka tosiasiassa n 1.5kwh. harmillista. Lisäksi jatkuvan mittauksen aikana voisi näyttö olla aina päällä. Niin kuin muissa vastaavissa ohjelmissa. Ja tietysti vaikka loggaus exceli :)

raiyani

Bed

Pan

useless app. does not detect the blinking led even with camera lens 1cm from led. app meant to do one simple thing but cannot do it

Rob

Fixed at 1000 Imp / kWh. Even after changing setting to 3200, still using 1000 / kWh A similar app which asks for the value before use, works fine but doesn't have the option of calculating cost so shame this app doesn't work properly. Have to manually divide figure by 3.2 (our meter is 3200 Imp / kWh) to get correct reading.

Clevelan

Wildly inaccurate - changing the impulse/kW doesn't change the readout.

Matinato

Unfortunately does not work, readings fluctuate between absurd values low and high (no I don't use 54 kW)

Ben

App insists phone has to be vertical even though it can see the single led fine horizontally it refuses to try and read if phone is not held vertical and since the phone wont fit in the space vertically this app is useless. Why? The orientation of a single flashing light changes nothing!
----------
Hi, thank you for the feedback. With lastest update 2.1 you can scan in any orientation.

MURK

No good!

Guest

Useless..nonsense

Guest

Bad not detecting

Guest

More segurida

Guest

No ability to change sensitivity to accomodate different cameras & meters. I could dimly see the IR LED in the app's window, in near darkness, but the app couldn't see it. App sucks.

Guest

it is very best only not perfesional

Guest

Excellent

Guest

Obviously only works if your meter has a blinking LED. My blinking one doesn't, so this blinking app is no use to me!

Guest

Simple, but works

Guest

Using this every day ❤ 6/5

Guest

The UI isn't that pretty and doesn't scale too nicely.. But it works!