INFORMATION

Updated:
BundleID:
scantwin.scanmM5.AllinOne
Version:
V 1.39
Category:
Tools
Required:
Android
Rating:
Publish:
2019-10-16
Price:
Free
Developer:

WHAT'S NEW

Fixed : connection to ELM WIFI

ScanM5X Data Logger App SCREENSHOT

【图】ScanM5X Data Logger(截图1)【图】ScanM5X Data Logger(截图2)【图】ScanM5X Data Logger(截图3)

ScanM5X Data Logger App DESCRIPTION

ScanM5X is a tool OBD for the ECU Marelli M59, M5A of Italian, Ducati, Guzzi motorcycles after 2001. It need an ELM327 Bluetooth or Wifi interface and connection kit to Tyco 3pins and need a motorcycle 12V power.

Reminder: the contact will be ON, less than 10sec before launching the app.
ScanM5X stores No. Id of each ELM-BT/Wifi already connected once and automatically connects

ScanM5X displays the values of the sensors in real time.
– displays sensors
– logs data in file
– displays and erase DTC
– runs standard Active Tests
– Reset Service lamp
– Reset TPS
– Change the trimmer (for ECU without lambda Sensor)
– displays status (side stand, Run/Stop)

ScanM5X is a diagnostic and tuning tool, they should not be used during the trip.

Need:
Fiat 3pin Alfa Lancia to 16 Pin Diagnostic Cable obd2
and
ELM327 OBDII V1.4 Bluetooth Diagnostic Interface OBD2 or ELM327 VGate Bluetooth OBD-II OBD2 or ELM327 Wifi.
Caution : it doesnt work with some ELM like Super Mini V2.1.

Thank you Frank, H@ns and Paul for their help and patience.
Link Bluetooth to Innovate sensors (@TM) conceived and designed by Implusive_Duc, Senior Member of Ducati.ms
– added explicit permissions for write file access to memory (datalog, route, DTC, setting)
– added explicit permissions for GPS location (speed, route)

See my site for some help
http://christian.giupponi.free.fr/Android/SCANM5X.HTM
and
voir http://christian.giupponi.free.fr/Android/SCANM5X_HC06.HTM

SIMILAR to ScanM5X Data Logger App

🔎 🚙 Instantly check the vehicle information & specs via trusted VIN decoder
Looking for a used vehicle🕵️♂️? Want to know the full history of your own car 🚘?Check Car History For Nissan will instantly reveal the car details and equipment list. Moreover, it will give you the path to spot mileage rollbacks, hidden damage, theft records, and historical photos.Use this VIN number check app to learn the key facts, including car history and other important vehicle information.👉 WHAT IS VIN AND VIN DECODER?VIN is an acronym for a vehicle identification number. This is a unique 17-symbol identification code of a specific car, bus, truck, or a trailer. All essential car life events from the factory to the scrapyard are being recorded using its VIN. VIN Decoder, also known as car check or auto check, is a software to decode the VIN number and get all the records about the car: from manufacturing data to various private and national databases.💡WHY IT’S SO IMPORTANT?The data obtained with the VIN number check is useful for comparing the vehicle’s condition on different dates. This helps you detect discrepancies due to various reasons: accident, part replacement, tuning,..
xDelete - Configure your AWD!
xDelete is the worldwide first tool to customize your xDrive System! Enjoy your xDrive car in full RWD mode, use our Sport & Snow presets, or customize the Rear/Front-Bias by yourself! It's all in your hands and done within minutes!xDelete will enable you to switch between AWD, AWD Sport and RWD in your xDrive equipped BMW!Currently, xDelete supports the following BMW:- E90, E91, E92, E60, E61, E70 (6-Speed) and E71 (6-Speed)- F-Series BMW MY 2012 and upFacts:- Smartphone/Tablet App to configure your xDrive-System.- 100% safe for your car- Not detectable by the dealer- No hardware to install, just a simple 30 second process through your Smartphone or Tablet- No fault codes triggered- Steering Assist, ABS & DSC stay fully functional- You can leave your car in RWD mode forever, or you can change between AWD and RWD mode all the time. Just as you like.- You can manage unlimited vehicles on one device (Licenses are per vehicle)More information can be found in the xAutomotive Knowledge Base: https://bit.ly/38YyP3C
Deep OBD analysis for vehicles similar to ISTA-D, INPA or Tool32
This open source app uses ECU files for OBD communication.Theoretically all operations that are possible with ISTA-D, INPA or Tool32, could be also executed with this application.At the moment only vehicles from BMW and VAG are supported.With a configuration generator simply select the diagnostics jobs to execute and create your own configuration files.For complex tasks the configurations files could be created manually.The app requires 2.5 GB of free external storage.The application supports the following OBD II adapters:- Standard FTDI based USB "INPA compatible" D-CAN/K-Line adapters (all protocols)- ELM327 based Bluetooth and WiFi adapters. Recommended ELM327 versions are 1.4b, 1.5 and origin 2.1, which are based on PIC18F2480 processor (no MCP2515 chip) (D-CAN protocol only) - Custom Bluetooth D-CAN/K-Line adapter (BMW-FAST protocol over D-CAN and K-Line)- A replacement firmware for the ELM327 Bluetooth adapter is existing, that is faster, more stable and that also supports K-Line (required for VAG vehicles, supports protocols KWP2000, KWP1281, TP2.0)- Deep OBD ENET WIFI adapter (for BMW F-models)
Tool for Diagnostic/Datalog for Marelli 16M, 15M and 15RC
Scan16M is an app for the diagnostic/datalog of ECU Marelli M15-15RC and M16. They equip Italian motorcycles from 1997-2000 models: ST2/4, SSie, 916/996 depending on the year. I can't test on P8 failing test vehicleScan16M allows you to connect to read sensors and defects, erase them and start Active diags.You can save the value in CSV file and convert it in DIF to read with LogWorks (Innovate Motors @TM)Phone/Tablet must be USB HOST (like Samsung Galaxy SII and TAB10")The OBDKKL interface connects via a USB port. We therefore need an interface that will also serve on PC and what connect to the diag Jack, ECU (Tyco 3 points) and 12V from the motorcycle joint at the point mass 2 of the Tyco plugTo use it need order a microUSB OTG [on-the-go] Cable, it happens for 3 to 5 euros.Warning : Some Smartphone are not OTG, like the Samsung Galaxy S5 mini
ScanM5X Data Logger for ECU Marelli 59, 5A, 5M with OBDII Bluetooth or WIFI
ScanM5X is a tool OBD for the ECU Marelli M59, M5A of Italian, Ducati, Guzzi motorcycles after 2001. It need an ELM327 Bluetooth or Wifi interface and connection kit to Tyco 3pins and need a motorcycle 12V power. Reminder: the contact will be ON, less than 10sec before launching the app.ScanM5X stores No. Id of each ELM-BT/Wifi already connected once and automatically connectsScanM5X displays the values of the sensors in real time. - displays sensors- logs data in file- displays and erase DTC- runs standard Active Tests- Reset Service lamp- Reset TPS- Change the trimmer (for ECU without lambda Sensor)- displays status (side stand, Run/Stop)ScanM5X is a diagnostic and tuning tool, they should not be used during the trip.Need:Fiat 3pin Alfa Lancia to 16 Pin Diagnostic Cable obd2andELM327 OBDII V1.4 Bluetooth Diagnostic Interface OBD2 or ELM327 VGate Bluetooth OBD-II OBD2 or ELM327 Wifi.Caution : it doesnt work with some ELM like Super Mini V2.1.Thank you Frank, H@ns and Paul for their help and patience.Link Bluetooth to Innovate sensors (@TM) conceived and designed by Implusive_Duc, Senior Member of Ducati.ms- added explicit..

ScanM5X Data Logger App DOWNLOAD

Free DownloadGoogle PlayOfficial Website

App REVIEWS

Alex

This is what i wanted to ask:if the connection to a wi-fi ELM adaptor is possible....I wanted to write an email but could not find a email adress...please put one in the help orcreate a "contact category" in the app menu.Thank you.
----------
You can write to scantwin * gmail.com, see on google play.

Guest

Good for basic stuff, fault codes, tps reset co trimmer great always works

David

Pretty bad
----------
Merci

Nikita

Works with Ducati Monster 400 (2004)

Rob

Ive got a Ducati 999s and getting the proper Ducati Diags is unrealistic. I got hold of JPDiag and the cables and was rather unimpressed after my mate said its dodgy and could damage the ECU and it took me loads of attempts to get it working. He advised to download ScanM5x and get the ELM327 adapter. Anyway I got the adaptor and put the app on my phone. Absolutely unbelievable !!! What an incredible app and it does exactly what it says on the box. All the tests work perfectly, I reset the service icon, ran the dashboard etc etc. Absolutely love it. Ducati people, forget JPDiag use this instead as it is brilliant.If you have problems connecting just check settings and make sure its either Bluetooth or wireless. Yes its that simple !!!!

Guest

I have a wifi elm . Won't connect to elm when set to wifi
----------
My ELM327 Wifi is broken, I can no longer test. But the last time I used it, it worked fine without modification since. To connect, it will ask you for the IP (192.168.0.10), the port (35000) and the password (12345678). (these are my default values, find yours). Continue in PM: scantwin@gmail.com.

Tony

enables easy access to ecu functions and logging

Yousef

Program worked great! Reset my TPS (once I replaced it) and the service (once I did it), worked like a charm. Ran into a little problem but turned out the bluetooth ELM that I was using was not functioning properly. With that being said, I would make sure you get a decent quality one and not the cheapest one you can get.

Taylor

Thanks so much for allowing me to tinker with and do resets on my Ducati. After trying to use DucatiDiag/JPDiag with no success, I took to the forums to find an article leading me to this. Worked like a charm. Was able to reset the TPS, service warning, and run tests. Perfect!

john

Straight forward and useful tuning and logging application. Many thanks to the developer for helping us fine tune our bikes.

David

unable to connect to ecu on my 1200 multistrada 12 plate
----------
Normal: this is not a Marelli M5x

Doug

Brilliant piece of kit. No more relying on a dealer. Thank you

mikemk92

Used BT adapter by Kommeni. Took a couple attempts to connect Pw:1234. Web page has a very good manual. Cleared service wrench on my 848 sf. Turn key off for 30 sec after pressing CLEAR SERVICE button in RESET menu. Wrench be gone!!

Gregory

Saved me a lot of time and a trip to the dealer just reset throttle position. Bonus is to be able to turn off the service wrench. Thanks!!

Craig422

Keeps giving me broken connection when trying to connect to ecu?? Please help.
----------
Send the description of errors at scantwin@gmail.com

David

Easy to use, does the job, and is free?! Thank you so much!

Karlos

Merci Christian!

Arik

Thank you.

sven

Plug and play alternative to JPDiag etc. Not complicated, clears service light, resets tps, tests, logs etc etc. Takes a minute to install once fairing is off. Don't pay the dealer, get this! Many thanks to the creator!

Garry

Super convenient & easy to use.