App Download

Local client and advanced server for Wifi Thermostats CT30, CT80, 3M50
If you have a radio (wifi) enabled thermostat CT-30 (aka 3M50) or CT-80, available from home depot or online) you can control it while in your home using this app which extends your phone to be part of your home monitoring or home automation systemUse your phone as a portable thermostat control!In contrast to the manufacturer's cloud management, this app is local with instant access and responseBeing local there's no security risk to your network (externally connected devices can serve as bridges to break into your home network) so you can disable the thermostat from accessing the internetThe app allows you to access your thermostat (locally) even when that cloud service or your internet connection is downNo more shivering/sweating, waiting and wonderingyou can make and see the change instantlyKeep an android phone or tablet by your bed as an alarm clock and handy thermostat.Use the thermostat widget so you can see what's going on at a glanceIf you need to change temperature settings while away from home you can continue to use the Radio Thermostat cloud service or for secure..
AutomationOnDrive is an extension app for Automation Manager
Install this app on the same android device where you are running the AutomationServer that comes with AutomationManager for IoTNote that AutomationManager is required for this extension app to function.AutomationOnDrive adds a cloud based remote interface to your AutomationServer by managing your AM devices using your Google Drive account through the Google cloud.Configure it with the name that you would like to use for that AutomationServer locationWhen asked, select the Google account that you will use for Google Drive accessNote this allows multiple locations.A file with the location name will be created for you on Google driveThis file contains the current status of your devices as provided by your AutomationServer and posted by AutomationOnDrive.Once you have your Drive hosted locations you can use AutomationManager through Google HomeThis is available as an inexpensive subscription to offset the Google charges for hosting the integration server; see the Google Home menu in the app for detailsYou can cancel at any time.No router configuration changes or account setup is needed for remote access of your devicesYou can now control your devices at that location..
Run your own home automation hub - escape the IoT clouds!
If you've spent your money on IoT devices you know that IoT automation can be slow and unreliable with restricted rule sets and manufacturer lock-inDo you want your *home* automation to stay in your home? Should it really be run over the internet in someone else's cloud? You may feel uncomfortable about using an overseas owned internet/cloud service to monitor and control your home lights and appliancesI want my lights to turn on even when my internet connection is down! With AutomationManager you manage your own *local* automation server to break free of those other systemsReprogram your overseas managed cloud IoT devices for safe local access.This is NOT the official product appsYou will still need the official app at least once to connect your devices to your WiFi (they use a locked/proprietary methods to set your router password into the device).Refund policy: your app purchase will be refunded if you are not satisfied with the app or you return your devicesCheck the developer site (below) for the refund procedure (it's painless).Why not free? Unlike most IoT apps, AutomationManager is NOT..
Faster control of your devices while at home.
Use this simple app to control your IoT devices while you are connected to your home WiFiIt includes widgets that you can add to your phone or tablet's home screen for single touch control as well as scenes for single touch control of multiple devices.NOTE this app was named before Google Home was releasedIt does NOT support Google HomeIf you do need to extend your Google Home, Alexa, IFTTT or Stringify capabilities see AutomationManager here on Play.This simple app with no advertising has more function and is 10x smaller than it's ad bloated freeware competitorsSee for yourself at the bottom of each app's play page. What else are those apps doing? WemoHome is 22x smaller than Belkin's app and runs on many more version of Android.The "Finding" functions can be used to find and confirm your IoT devices are working even when the manufacturer app cannot find them.Refund policy: your purchase will be refunded if you are not satisfied with the app, you chose to return your devices, or if you upgrade to AutomationManagerI do ask that you not give..
A extra DSC keypad on your phone for your DSC/envisalnk card.
This is a DSC keypad emulator that allows you to use your android phone as an additional local keypad (for example beside your bed at night, no wiring required)It allows your phone to be part of your home automation and home monitoring system.This app works with an Envisalink 2DS or 3DS card connected to a DSC Power System Panel and LAN wired into your switch or routerIt can be used with a wifi or ethernet capable phone or tablet connected to your routerUse of the EYEZ-ON service is highly recommended but is not required.DO NOT expose your Envisalink IP connection or the HTTP page to an unprotected network; communication provided by the Envisalink card is not secureThis DscKeypad app and more is included with the full DscServer also available on Google PlayThe DscServer extends the Envisalink card to allow self monitoring and secure remote access, and extends the Envisalink TPI to support multiple DscKeypad clientsThe DscServer can become part of your total home automation system, rivaling those like Rogers Smart Home Monitoring, Time Warner's IntelligentHome, and moreHave a look on..
DIY remote access and monitoring for DSC panels using the envisalink card
This server works a proxy for the Envisalink 2DS/EVL3/EVL4 card connected to a DSC Alarm PanelIt will allow you to, among other things, self monitor your alarm system and allows your phone to work as part of your home monitoring and home automation systemYou can remotely access your alarm system from anywhere your phone can access the internetUse of the EYEZ-ON service is also highly recommended but is not required.The DscServer runs on a dedicated, always on, always connected android phone or tablet running within your networkUsing it, multiple instances of the DscKeypad App and DscKeypad widgets (included) or other similar applications (such as Mi Casa Verde Vera or other automation products) may connect simultaneously using the "fan-out" capability providedThe DscServer appears to any client as a faster version of the Envisalink card itself with some additional capabilities (e.g. zone and partition labels)The server requirements are very modest, I use an old LG phone to run my entire home automation systemSuitable new android phones are available for $10-$30This simple automation extension can rival the much more expensive services like Rogers..
Unleash your Wemo Link and LED bulbs with WemoLEDs.
The Belkin WeMo app struggles enough without asking it to do more by actually using to control your Wemo LEDs.Once you've managed to have your LED bulbs recognized by your Wemo LINK using the Belkin app, close it for good and use this app to control all of your LED bulbs quickly and easily.WemoLEDs starts much faster, runs and switches your LEDs much faster, and enables more of your LED function than Belkin's appIt runs on many more versions of android and uses a tiny fraction of the system resources needed by Belkin's and other apps.Use the included WemoColors for continuous programmable color changes when using OSRAM RGB bulbs.Finding your Wemo Link, linking and removing bulbs, creating and editing groups are much easier with this app.Use widgets on your home screen to directly switch your bulbs on, off, set brightness, set a sleep timer, or a fade timerAssign your own images to the bulbs to create a custom home automation control panel assembled from widgets on your tablet.Presets (and Presets widgets) are single touch buttons or voice control commands to..
Add a HomeBridge from your AutomationManager for IoT server to apple's Homekit
If you've been waiting for your devices to be useful from an iPhone, wait no more! AM HomeBridge bridges devices managed by your AM Server to apple HomeKitYes, this includes the devices belkin left out of their own home bridge implementation.Using this bridge enables your devices to be used on your iPhone and with Siri without sharing your iCloud credentials with the device vendorsThey are bridged to HomeKit by AutomationManager using only local device APIs.A low end android phone plus Automation for IoT plus AM HomeBridge enables all AM Manager supported devices to be used from Apple HomeKit for less than the cost of the belkin HomeBridge.Unlike belkin's homebridge, this bridge includes the Wemo Maker, Wemo Link/Bulbs as well as the other Wemo products, plus TP Link switches, sockets and bulbs, Philips Hue bulbs and sensors, and custom ESP8266 devices running the MppDevice firmware.Note: you need Automation for IoT installed, configured, and running on a dedicated (low end) android phone for AM HomeBridge to work.If you're not satisfied with any of my apps please contact me for a refund (with..