App Download

Shows radio bands, UL and DL frequencies, channel nos. and max. UE output power.
The Rohde & Schwarz Wireless Communications Calculator is an essential part of any wireless engineer's toolkit. Featuring all of today's most important and popular cellular and non-cellular standards, we cover them all from A to Z. Just enter the radio access technology and band of interest, and we do the rest. Enter a channel number and we'll provide the correct downlink and uplink frequencies in both numeric and graphic format. Low, mid, and high channels are also shown for a quick reference. Enter a downlink or an uplink frequency and we'll provide the correct downlink and uplink channels. In the "power" mode, we give you the maximum UE power allowed for that class device, or, in the case of GSM, power versus PCL/Gamma.
Monitor and control Rohde & Schwarz Value instruments on your mobile device.
R&S Mobile View enables you to conveniently monitor and control Rohde & SchwarzValue instruments on your Android tablet or smartphone. The built-in File Transfer utilityallows for easy file management between the instrument and your mobile device.After starting R&S Mobile View you can easily connect to an instrument anywhere in theworld using its IP address or automatically scan for supported devices in your localnetwork. Once a connection has been established, you will automatically be presentedwith the Remote Control environment tailored for your instrument type.Navigating through the App is done using a menu which is easily accessible by swipingfrom the left side of the screen. For larger screen sizes, this menu is shown by defaultwhen in landscape mode.The File Transfer utility is accessible through the menu and consists of an upper regiondisplaying the local storage on your mobile device and a lower region displaying the filesystem on your Rohde & Schwarz instrument.To transfer a file or directory, simply long press a desired item and tap the blue transferbutton in the bottom-right corner. Further actions such as creating, removing andsharing items are available..
Helps to measure pulsed signals on RF spectrum analyzers.
In environments such as mobile use as well as in service shops and education, spectrum analyzers withdedicated built-in pulsed-signal analysis features are often not available. The app Pulsed RF Calculator aids in finding the right choice of spectrum analyzer settings to calculate the so-called pulse desensitization for manual compensation of pulsed signal amplitudes.Automatic compensation and many other features necessary for in-depth pulsed signal analysis require the use of instruments with dedicated built-in functionalities and are outside the scope of this app.
Enables mobile RF power measurement with up to 4 R&S® NRP series Power Sensors
With the new Power Viewer Mobile 2 App you are able to use all Rohde&Schwarz NRP series RF Power Sensor with your Android smartphone or tablet. Requirements:o R&S®NRP Power Sensoro R&S®NRP-Zxx Power Sensoro Device with Android 5.0 or highero USB-OTG adapter cable (If the sensors should be used via USB)o Network connection with PoE (If Network Sensors should be used)Optionally a USB hub can be used to connect more than one USB sensor to the Android device.Supported Features:o Continuous average modeo Trace modeo Up to four sensors simultaneouslyo Support for Measurement over Network (with R&S®NRP-xxXN power sensors)o Flexible user interfaceo Extensive settings for the supported measurement modesImportant:This app depends on a working USB host (USB – On The Go) controller built into your device. Some smartphones block high-power USB devices. In this case only the sensors with low supply power requirements will work, or the use of a self-powered USB hub is necessary.The Trace Measure mode is only available with Sensors with support of this mode. If a Sensor doesn’t support this mode, nothing will be shown if switching to..
Calculate power flux density, electric and magnetic field strength from TX power
The program Field Strength and Power Estimator calculates power flux density, electric and magnetic field strength from the transmitted power, associated frequency and gain of the transmitting antenna.Additionally the input power into a receiver with 50 Ohm input impedance is calculated from the gain of the receiving antenna.The program automatically converts power flux density into electric and magnetic field strength.Depending on the transmitted frequency, various parameters influence the received power and field strength, such as non-line-of-sight propagation, changes in polarisation, reflections, and multi-path propagation affect the true values. Additionally antenna VSWR and cable losses have to be considered.The program Field Strength and Power Estimator does not consider these impairments. It assumes conditions, that are close to the best possible theoretical values. This is why we say the program is an Estimator, not a Calculator.Quick Start________________________________To start calculation, just select a row by touching it and change a specific value.After touching the "Estimator" button in order to return to the main menu, the dependent values are calculated automatically.The results are displayed with 3 decimal places only (except the antenna gain values,..
Quick calculation of the forward link from a ground station to an aircraft
General________________________________The program Aviation RF Link allows quick calculation of the forward link from a ground station to an aircraft. Based on the RF power of the ground station, the tool calculates the distance with a given field strength to be achieved at the aircraft antenna or calculates the field strength at a given power and distance to the aircraft.The tool calculates the path loss based on line-of-sight (LOS) conditions and does not take into account multipath propagation on the ground.In addition to the RF path, the tool calculates the radio horizon based on the given height of the aircraft and the ground station. If the calculated LOS is lower than the distance that can be achieved with the given radio conditions, this is indicated by a red dot on the LOS tab. In this case, the radio horizon is the limiting factor and not the RF link budget.The line of sight is calculated in accordance with ICAO Annex 10 Vol. V.The default for the antenna gain of 2.14 dBi corresponds to an omni directional antenna.The default for the field strength..
Log unit conversion & convenient correlated/uncorrelated power level calculation
The dBCalculator software comprises five independent calculation tools.PLEASE NOTE: Calculations based on coherent vs incoherent levels yield very different results. If you see an unexpected result, please verify the uncorrelated/correlated setting of this app first dbmCalculator:This tools helps to add and subtract an arbitrary number of power levels expressed in units of dBm and watt.VoltageCalculator:This tools helps to add and subtract correlated and uncorrelated voltage levels.UnitConverter:This tool calculates for an entry using a unit such as dBm, dBW, mW, W, mV, V, dBV, dBµV and dBu the corresponding values for all other units, for individual impedance values.